Robotik & Automatisierung

Mass and stiffness are the whole problem

Every gram at the end of a robot arm costs payload, cycle time and energy — but a part that flexes under acceleration destroys repeatability. Robotics components live at that trade-off, and machining is how it gets resolved.

We machine deep pockets with thin ribs, hold wall thickness within ±0.05 mm so finite-element predictions still apply to the real part, and stress-relieve between roughing and finishing so the geometry that leaves the machine is the geometry that stays.

Bearing and gear interfaces

Cross-roller bearing seats, harmonic drive and cycloidal gearbox interfaces need roundness and perpendicularity, not just diameter. We hold bore roundness within 0.005 mm and perpendicularity to the mounting face within 0.01 mm, verified on a CMM.

Repeatability across a fleet

When you build fifty identical robots, the fiftieth axis housing has to match the first. Our production control fixes the fixture, the programme revision and the tool list, and we monitor nominated dimensions with SPC so drift is visible before it becomes a non-conformance.

Integration-ready delivery

Parts arrive deburred, anodised, laser-marked with your part number and revision, and kitted per assembly if you want them that way — so your assembly technicians open a box and build, rather than sort.