Sobre nosotros
Un taller de precisión construido sobre ingenieros, medición y repetibilidad.
Resumen de equipamiento
La documentación técnica se mantiene en inglés para preservar la exactitud de los términos de ingeniería.
How we work
We are a contract manufacturer of precision-machined components. That sentence does a lot of work: it means we do not sell a catalogue, we make what your drawing specifies, and the drawing is the contract.
Most of our customers are engineering teams — design engineers, buyers and quality managers who have a print, a deadline and a tolerance they cannot compromise on. What they usually want from a supplier is not the lowest price on a spreadsheet, but a predictable one: parts that measure right, arrive when promised, and come with the paperwork their own quality system demands.
What we chose to invest in
Three things, in this order.
People who can read a drawing. Every quotation is reviewed by a manufacturing engineer before it reaches you. That costs us margin on small enquiries, and it is the reason our first-article rejection rate stays low: problems get found at the quotation stage, not on the shop floor.
Measurement. A temperature-controlled metrology room with three bridge CMMs is an expensive thing for a shop our size. It exists because a tolerance you cannot verify is a tolerance you do not actually hold.
Process capability rather than machine count. We would rather run fifty machines properly maintained, calibrated and documented than eighty that are merely busy.
Where we are going
Certification is the current focus. Our quality system already runs the disciplines required by ISO 13485 and IATF 16949 — segregated lots, change control, documented validation — and formal certification is in progress. AS9100D follows.
We would rather tell you honestly what is certified today and what is in progress than list logos we have not earned.
Working with us
You will deal with an engineer, not a chatbot. Quotations come back within a working day with a note on manufacturability. Drawings stay confidential, NDAs are signed before file exchange if you want one, and tooling you pay for belongs to you.
If we cannot make your part to the tolerance you need, we will tell you that too — and, where we can, suggest who can.
Lo que defendemos
Presupuestos revisados por ingenieros
Cada solicitud la revisa un ingeniero de fabricación: cadena de cotas, espesores de pared, accesibilidad de herramienta y factores de coste. Recibe una nota DFM, no solo un precio.
Documentado y trazable
Certificados de material (EN 10204 3.1), informes dimensionales y declaraciones RoHS y REACH. Cada lote es trazable hasta la materia prima y el operario.
Confidencialidad por defecto
Los planos se almacenan en servidores con control de acceso, nunca se comparten con terceros y, bajo petición, firmamos un NDA mutuo antes de cualquier transferencia.
Un proveedor, toda la cadena de proceso
Mecanizado, tratamiento térmico, acabado superficial, marcado láser y montaje los coordinamos nosotros. Menos interfaces, menos retrasos, un único responsable.
Hitos
- 2008
Founded
Started as a four-machine job shop serving local machine builders.
- 2013
ISO 9001 certified
Formal quality system introduced; first European customers onboarded.
- 2017
Metrology room
Temperature-controlled inspection room and first bridge CMM commissioned.
- 2020
5-axis capability
Simultaneous 5-axis machining added for aerospace and medical geometry.
- 2023
Automation
Bar feeders, pallet changers and lights-out shifts for series production.
- Today
Certification roadmap
ISO 13485 and IATF 16949 in progress; AS9100D to follow.
Resumen de equipamiento
Envíenos su plano hoy mismo
STEP, IGES, X_T, DWG, DXF, PDF o STL. Cada archivo se trata como confidencial y se cubre con NDA bajo petición.